AQUA SEAL 2K

Whatsapp Video TDS
Category:

Description

BD AQUA SEAL 2K is a two component, polymer- modified, flexible Cementitious waterproofing coating specially formulated for Concrete and Masonry Surface which is supplied in ready-mix kits (2 parts). When the dry powder is mixed with acrylic-modified emulsion and applied According to direction, the cured coating become a tough, flexible and seamless waterproof membrane and acts as an excellent water barrier to Concrete and Masonry Surface.

AREA OF APPLICATIONS

Wet areas such as bathrooms, showers, kitchen etc. Water bodies like swimming pool, water tank, fountains etc. Concrete Roof, domestic applications, commercial applications. Plaster surfaces, cement-based screeds, concrete, masonry surface, light weight block.

ADVANTAGES

Easily apply by brush/ roller.

Flexible – Bridges cracks in concrete/ surfaces. Excellent adhesion to concrete and masonry substrates Provides a waterproof surface & eliminate water leakage. Conforms to portable water contact parameters.

Low VOC – For healthy living.

LIMITATIONS

It is recommended for under tile waterproofing. For large interior baseme

-nt walls waterproofing & other critical waterproofing, please connect with BUILDING DOCTOR Technical team.

BD AQUA SEAL 2K is meant for the waterproofing coating, not for load be

-aring.

BD AQUA SEAL 2K is not suitable for high traffic care application.

Note : Test results are indicative as per testing method specified in standard. Test results may vary as per substrate, site condition & testing machine etc. Actual field performance will depend on installation methods and site conditions.

Technical Properties Test Results
Appearance : Part A – White Liquid ,Part B – Grey Powder
Density : 2 ± 0.05 kg/ litre
Application Temperature : 10°C to 40°C
(Substrates and Materials)
Mixing Ratio (w/w) : 1 part of liquid (Pack A) 3 parts of powder (Pack B)
Pot life of mixed material : Minimum 2 hours
Touch Dry : 30 to 40 mins
Over-coating Interval : 4 to 6 hours
Colour of Cured Film : Grey
Adhesion on Concrete as per : > 0.5 N/mm2
ASTM D 7234 >
Resistance to water penetration : Passed with no water penetration
(DIN 1048)
Water Permeability @ 5bar : NIL
(EN 12390-8)
Water Portability (Is10500) : Portable

Mixing material must be use within recommend pot life.

Reinforce corners, coving, drainage flange, & PVC pipes with 40 Gsm Geotextile/ fleece fabric with BD AQUA SEAL 2K waterproofing coating.

METHOD OF USAGE

Surface must be clean, dry and in sound condition to ensure adequate adhesion.

Slowly add Powder part to Liquid part in a clean container& mix it with mechanical mixer until a smooth and homogenous slurry mixture  is achieved.

Allow the mixed slurry to stand for 5-10 minutes fore leasing trapped air.

Mixing material must be use within recommend pot life.

Reinforce corners, coving, drainage flange, & PVC pipes with 40 Gsm Geotextile/ fleece fabric with BD AQUA SEAL 2K waterproofing coating.

The first coat must be well applied into the undulations of the surface.

When 1st coat is dry in 4- 6 hrs, apply the 2nd coat.

Sprinkle liberally coarse quartz sand (30-60 mesh/ 250-500 microns) while second coat is still wet to provide key for subsequent plaster or tile application.

PRECAUTIONS & NOTE

  • BD AQUA SEAL 2K is a pre-measure Do not dilute with water or add any more sand or cement.
  • Do not apply when temperatures are below 10⁰C and above 40⁰C.
  • Drying time may vary depending on the prevailing climatic conditions; low temperature and higher relative
  • Humidity may prolong the drying Protect from direct rainfall/ foot traffic for at least 24 hours.
  • Refer to product MSDS prior to use or for specific
  • Pond test shall be carried out only after 72 hrs of air curing/ drying for 2 days to check the leakage in coating.

COVERAGE

  • 75 sqt / 20 kg pack would be covered in two coats with a thickness of 1 to

1.5 mm depending on the surface conditions

  • 45 – 0.65 m²/ kg of mixed material in two coats with a thickness of 1 to

1.5 mm.

PACKAGING

20 Kg pack

SHELF LIFE

12 months for sealed pack when stored under cover, out of direct sunlight, damp proof condition and protect from extremes of temperature.

SAFETY PRECAUTIONS

Keep out of reach of children. Wear suitable protective clothing, gloves and eyes/face protection. After contact with skin, wash immediately with plenty of clean water. n case of contact with eyes rinse immediately with plenty of clean water and seek medical advice. Limited to professional use only.

For more details please refer the relevant Material Safety Data Sheet, available on request.

Reviews

There are no reviews yet.

Be the first to review “AQUA SEAL 2K”

Your email address will not be published. Required fields are marked *

Go to Top